How to remove a car fuse
Low-voltage fuse manufacturers tell you, The car fuse is when the circuit fails and the circuit exceeds the rated current, the fuse will fuse the circuit, thus starting the protection function. When the fuse blows, how to pull out the car fuse?
(1) The start switch and all electrical equipment need to be turned off first, and the battery negative cable needs to be disconnected.
(2) For different models, there will be some differences in the position of the fuse. Usually, the fuse box will be near the battery, and it will be fixed with a buckle. For some high-end models, the fuse box will have bolts to be tightened, and you need to be careful about this. You can see the fuse after removing the box.
(3) Then use tweezers to hold the fuse, and you can take out the fuse by pulling it slightly upwards.
When pulling out the fuse, Low-voltage fuse manufacturers tell you,you need to be careful not to push it with your hands. Generally, there will be matching tweezers on each fuse box to facilitate the owner to take out the fuse. At the same time, both ends of the tweezers can be used, so that it is convenient to take out the large and small fuses.
Fuse Repair
(1) Find out the reason: First find out the reason, what caused the fuse to burn out, generally it may be caused by too many electrical appliances, resulting in excessive current.
(2) If not, is there a short circuit in some electrical appliances? Troubleshooting is necessary to proceed to the next step.
(3) Turn off the power: push down the switch knife to ensure that the power is turned off, open the switch box, and you can see the fuse inside.
(4) Replacing the fuse: Prepare a fuse of the same length and replace the fuse of the same type and thickness.
(5) Open the screw: Unscrew the screw to be connected to the fuse, it does not need to be unscrewed, just ensure the thickness of the fuse.
(6) Connection: Connect the fuse, of course, just connect it.
(7) Then tighten the screws to fix it.
(8) Electric circuit failure: If there is a short-circuit failure in the electric circuit (socket) at home, the first thing to do is to eliminate the fault, and then replace the new fuse (fuse) or replace the air switch with the corresponding capacity.
(9) Load electricity: If it is overloaded, replace the new fuse (fuse) or replace the air switch with the corresponding capacity to reduce the number of household appliances (especially high-power household appliances) used at the same time.
Another word for fuse
The fuse is also called a current fuse, and the IEC127 standard defines it as a "fuse-link"; it is mainly used for overload protection. If the fuse is properly placed in the circuit, the fuse will cut off the current when the current abnormally rises to a certain height and heat, thus protecting the safe operation of the circuit.
How much does a fuse cost?
Zhiguang provides various fuses free of charge, various fuse prices, and various fuse quotations. Low-voltage fuse manufacturers tell you, According to the rated voltage, they can be divided into high-voltage fuses, low-voltage fuses, and safety voltage fuses. According to the breaking capacity, it can be divided into high and low breaking capacity fuses.